- Generated by
1.9.8
|
HLIBpro 3.1
|
The following parameters of 𝖧𝖫𝖨𝖡𝗉𝗋𝗈 are defined in the Hpro::CFG namespace with corresponding sub namespaces.
You may either read/write the parameters within your source code, e.g.,
or via environment variables. In the latter case, "::" is replaced by "_" and "CFG" is omitted, e.g., instead of
the environment variable
is used with boolean values defined by 0 or 1.
Furthermore, a list of all parameters with values may be printed via
If the file .hlibpro.conf is present in the current working directory, it is read for setting the parameter values. The syntax of the file is equal to typical configuration files, e.g.
Each of the below described parameter topics (BLAS, Cluster, Build, Arith, Solver, BEM and IO) defines a config section. Within a section the parameter name is equal to the C++ name.
An example for such a configuration file looks like
Comments are supported with the prefix #, e.g.,
In the C bindings the corresponding functions for setting, reading and printing the parameters are
Please note, that the names and values correspond to the names and values of the environment variables and not of the C++ parameters.
| Name | Type | Description | Default Value |
|---|---|---|---|
approx_method | int | use SVD (0), RRQR(1) or Rand-SVD (2) for dense approximation | 0 |
trunc_method | int | use SVD (0), RRQR(1) or Rand-SVD (2) for low-rank truncation | 0 |
power_steps | int | number of steps of power iteration in Rand-SVD | 0 |
sample_size | int | block size in adaptive Rand-SVD | 8 |
oversampling | int | oversampling size in fixed rank Rand-SVD | 0 |
use_double_prec | bool | use double precision SVD for single precision types | false |
use_gesvj | bool | use gesvj instead of gesvd/gesdd | false |
gesvd_limit | idx_t | upper matrix size limit for using *gesvd (*gesdd for larger matrices) | 1000 |
check_zeroes | bool | check for and remove zero rows/columns in input matrices of SVD | false |
check_inf_nan | bool | check for INF/NAN values in input data | false |
𝖧𝖫𝖨𝖡𝗉𝗋𝗈 implements three different approximation/truncation algorithms based on singular value decomposition (SVD), Rank-revealing QR (RRQR) and randomized SVD (Rand-SVD).
By default, SVD is used. This algorithm will always return the best approximation but but usually also has the longest runtime.
Rank-revealing QR (RRQR) uses column pivoted QR to determine the numerical rank of a given matrix. This is used in 𝖧𝖫𝖨𝖡𝗉𝗋𝗈 to truncated low-rank matrices with respect to a given precision or rank. In contrast to the SVD based algorithm, RRQR does usually not compute a best approximate, which normally results in a larger rank of the low-rank matrices or reduced accuracy in case of a fixed rank. However, the RRQR algorithm is faster than SVD, which results in a better runtime of the H-algorithm.
Rand-SVD uses randomized algorithms to compute matrix approximations. It may be used for fixed and adaptive rank computations. In the latter case, an iteration is used to compute a sufficient approximate. Various parameters influence the behaviour of Rand-SVD and also the possible outcome of the approximation.
Please note, that the behaviour of all algorithms is strongly depended on the given H-matrix. While in some cases, RRQR or Rand-SVD may be faster compared to SVD, the latter may be faster in other cases due to higher ranks computed by RRQR/Rand-SVD.
If 𝖧𝖫𝖨𝖡𝗉𝗋𝗈 is compiled with single precision value types, setting use_double_prec to true, results in using double precision for computing the SVD during truncation. This increases accuracy and may reduce memory due to more accurate rank estimates.
LAPACK provides an additional SVD algorithm (gesvj), which is often more accurate compared to the standard algorithms (gesvd, gesdd). Especially for extreme cases, e.g., very small singular values, this may be a better choice. However, gesvj is slower compared to the other algorithms (usually a factor of two).
The SVD based algorithm may have problems of the input matrix has zero rows/columns (more precise the LAPACK algorithms used by the truncation). To fix this, such rows/columns can be eliminated from the input matrices.
| Name | Type | Description | Default Value |
|---|---|---|---|
nmin | uint | upper limit for minimal block size | 60 |
split_mode | default split mode during geometrical clusterung | adaptive_split_axis | |
adjust_bbox | bool | adjust bounding box during clustering to local indices and not as defined by parent partitioning | true |
cluster_level_mode | permit block clusters with clusters from different levels or not | cluster_level_equal | |
sync_interface_depth | bool | synchronise depth of interface clusters with domain clusters in ND case | true |
sort_wrt_size | bool | sort sub clusters according to size, e.g. larger clusters first | false |
build_scc | bool | compute strongly coupled components prior to algebraic clustering | true |
METIS_random | bool | use randomized seed for METIS | true |
The optimal value for nmin depends on the given problem and what is to be optimised: memory or runtime. As a rule of thumb, the smaller nmin the less memory is used and the larger nmin the better the runtime.
The default value is chosen based on benchmarks for dense matrices. For sparse matrices a higher value is often better (nmin = 100 ... 300).
When partitioning a given geometry using binary space partitioning (BSP), the split axis may be chosen regularly (regular_split_axis), i.e., cycling through x, y and z axis or adpative (adaptive_split_axis), i.e., choose the longest axis. Theory usually assumes regular splitting while adaptive splitting often results in a better (less memory, better runtime) partitioning.
During BSP the sub domains may be assigned a bounding box by splitting the bounding box of the parent domain along the split axis or by recomputing the bounding box based on the coordinate information of the indices in the corresponding sub domains. The latter method usually reduces bounding box sizes and leads to a coarser partitioning of the H-matrix, which in practise is often more optimal (less memory, better runtime). However, theory usually assumes a non-adaptive bounding box.
When building block clusters, i.e., a product of two clusters, normally only clusters of the same level are permitted to form block clusters. For some applications it may result in a better partitioning when also allowing clusters from different levels during block cluster tree construction (see also sync_interface_depth).
If nested dissection is used, the depth of the interface tree is normally adjusted to the depth of the domain trees. For some applications, switching this off may result in a better partitioning (see also cluster_level_mode).
| Name | Type | Description | Default Value |
|---|---|---|---|
recompress | bool | recompress result of low-rank approximation | true |
coarsen | real | agglomorate low-rank subblocks during construction | false |
to_dense | bool | convert large rank low-rank matrices to dense to save memory | true |
to_dense_ratio | double | defines ratio for dense conversion, i.e., convert if rank >= min(#rows,#cols) * ratio | 0.5 |
pure_dense | bool | always convert low-rank matrices to dense format (debugging) | false |
use_sparsemat | bool | use sparse matrices during construction | false |
use_zeromat | bool | use special zero matrices during construction | true |
use_ghostmat | use special ghost matrices for distributed computation | false | |
check_cb_ret | bool | check data returned by callback functions during construction | true |
symmetrise | bool | symmetrise dense diagonal blocks of symmetric matrices | true |
aca_max_ratio | double | maximal rank ratio (lowrank/fullrank) before stopping | 0.25 |
When computing low-rank approximations for admissible blocks, the result may not have minimal rank if adaptive rank was chosen. In such cases, a recompression of the block is performed to ensure this property. As it only adds little to the whole computation time, it is on by default.
By joining lowrank subblocks into a single larger lowrank matrix, the overall memory consumption may be reduced. It can also be seens as an adaptive procedure for determining admissible blocks, e.g., if the admissibility criterion for constructing the block cluster tree was to pessimistic. However, the overall computation time typically increases by one third, so this is off by default. Also, in some cases the accuracy is slightly reduced by coarsening.
Lowrank matrices only save memory if the rank is less then half the number of rows/columns in a block. If the rank exceeds this limit, it is better to convert the matrix format to dense representation. By default to_dense is on with to_dense_ratio set to 0.5 to optimise matrix memory.
For arithmetic, this limit might be even less since dense arithmetic is more efficient than lowrank arithmetic (the latter usually involving truncations). To optimise the conversion limit, to_dense_ratio might be set to smaller values than 0.5.
If this is on (default), the return values of callback functions, e.g., for computing matrix coefficients, is checked for illegal values, e.g., NaN or Inf.
In case of symmetric or hermitian matrices, this parameter controls whether dense diagonal blocks are enforced to be symmetric/hermitian. This is done by copying the coefficients from the lower triangular to the upper triangular part. By default, this is on.
If ACA detects convergence problems during low-rank approximation, this ratio defines the maximal rank at which the iteration is stopped by comparing with the full rank, e.g., unless
\[k < \operatorname{fullrank} \cdot \operatorname{aca\_max\_ratio}\]
ACA proceeds.
| Name | Type | Description | Default Value |
|---|---|---|---|
use_dag | bool | use DAG based arithmetic | true |
dag_version | uint | DAG version to use (1: old, 2: new) | 1 |
use_accu | bool | use accumulator based arithmetic | false |
lazy_eval | bool | use lazy evaluation in arithmetic | false |
sort_updates | bool | sort updates based on norm before summation for lazy evaluation | false |
abs_eps | real | default absolute error bound for low-rank truncation | 0 |
recompress | bool | recompress matrix after low-rank approximation | true |
to_dense | bool | convert large rank low-rank matrices to dense to save memory | true |
to_dense_ratio | double | defines ratio for dense conversion, i.e., convert if rank >= min(#rows,#cols) * ratio | 0.5 |
eval_type | point-wise or block-wise evaluation of blocks | block_wise | |
storage_type | storage type of diagonal blocks in factorisation | store_inverse | |
max_seq_size | size_t | switching point from parallel to sequential mode | 100 |
max_seq_size_vec | size_t | switching point for vector based operations | 250 |
coarsen | bool | coarsen matrix during arithmetic | false |
check_cb_ret | bool | check data returned by callback functions during construction | true |
arith_max_check | uint | upper matrix size limit for addition tests during arithmetic | 0 |
pseudo_inversion | bool | use pseudo inversion instead of real inversion | false |
symmetrise | bool | symmetrise matrices after factorisation | true |
zero_sum_trunc | bool | truncation of low-rank matrices if one summand has zero rank | true |
For multi and many core chips, the DAG based H-arithmetic is able to utilise the CPU resources much better than the classical recursive algorithms. Only for sequential computations, a slightly better runtime may be possible with the recursive approach due to overhead for DAG based computations.
Define the version of DAG to use during arithmetic. Version 1 corresponds to the previous version of DAGs generated directly from H-matrix structures with global scope. Version 2 is the new approach based on refinement of DAG nodes recursively following the H-arithmetic functions with automatic dependency generation.
If true, the accumulator based arithmetic is used, in which updates are accumulated before being applied to the destination blocks. This reduces the number of truncations and therefore the runtime of H-arithmetic. However, in some applications the accuracy of the arithmetic is slightly reduced. By default, it is off.
In case of accumulator based arithmetic, updates to a specific block are only computed if this block is needed for further computations. The accuracy of lazy evaluation is inbetween standard arithmetic and eager computation. However, it is often slightly slower compared to eager but still faster compared to standard arithmetic.
If sort_updates is true, the updates are combined such that the updates with the smallest norm are summed up first.
Singular values smaller than abs_eps are removed from the resulting matrix during truncation independent on the given accuracy or rank.
The low-rank approximations computed during H-matrix construction may not be optimal with respect to the rank. A recompression using SVD (or RRQR) may reduce the rank and hence memorr without affecting accuracy.
The evaluation type affects the handling of diagonal leaf blocks. Either factorisation is also performed for such blocks (point_wise) or the blocks are handled as a full block using inversion (block_wise). The latter has several advantages, e.g., permits limited pivoting during inversion and increases performance due to better cache utilisation (BLAS level 3 functions).
When computing matrix factorisations, the diagonal leaf blocks may store either the actual result of the factorisation (store_normal) or the inverse of such blocks (store_inverse). Since for evaluation of the inverse operators, either during factorisation or during matrix-vector multiplication, the inverse if the matrix blocks is needed, storing the inverse results in better performance.
However, if also the original matrix should be evaluated using the factorised form, normal storage may be more optimal in terms of runtime.
Matrices smaller than max_seq_size are handled by H-arithmetic sequentially since this is more efficient compared to parallel handling. Same holds for max_seq_size_vec in case of matrix-vector operations.
When computing the inverse of diagonal blocks in block-wise factorization algorithms, normal inversion might not be possible (since not regular) or unstable. In such cases, the pseudo inversion may be used to compute approximations to the inverse. By default this off.
If lowrank matrices are summed up, normally a truncation is performed afterwards. However, in case that one of the summands has a zero rank, this might not be necessary. The exception is, if the positive rank summand is an update which was not yet truncated to the desired accuracy. Therefore it is on by default.
| Name | Type | Description | Default Value |
|---|---|---|---|
max_iter | uint | maximal number of iterations | 100 |
rel_res_red | real | relative residual reduction, e.g., stop if \( |r_n| / |r_0| < \varepsilon\) | 1e-8 abs_res_red | real | absolute residual reduction, e.g., stop if \(|r_n| < \varepsilon\) | 1e-14 rel_res_growth | real | relative residual growth (divergence), e.g., stop if \(|r_n| / |r_0| > \varepsilon\) | 1e6 gmres_restart | uint | restart for GMRES iteration | 20 initialise_start_value | bool | initialise start value before iteration | true use_exact_residual | bool | compute exact residual during iteration | false
This parameter stops the iteration in case of divergence.
Normally, the start value of the iteration is initialised as \(x_0 := W b\) with \(W\) being the preconditioner. In case of a good (or very good) preconditioner, e.g., \(W \sim A^{-1}\), this may eliminate iteration at all.
However, if the user has a good guess for the start value this behaviour may be switched off.
Most iterations approximate the residual norm during computations. Especially in the preconditioned case, this may result in a large deviation from the real residual norm. At the expense of one (unpreconditioned case) or two (preconditioned case) additional matrix-vector multiplications, the exact norm is computed instead.
| Name | Type | Description | Default Value |
|---|---|---|---|
quad_order | uint | default quadrature order | 4 |
adaptive_quad_order | bool | use distance adaptive quadrature order | true |
use_simd | bool | use special vector functions if available | true |
use_simd_sse3 | bool | use special SSE3 vector functions if available | true |
use_simd_avx | bool | use special AVX vector functions if available | true |
use_simd_avx2 | bool | use special AVX2 vector functions if available | true |
use_simd_avx512 | bool | use special AVX512 vector functions if available | true |
use_simd_mic | bool | use special MIC vector functions if available | true |
use_simd_vsx | bool | use special VSX vector functions if available | true |
For the evaluation of the bilinear forms a quadrature rule is used for which the default order is defined with this parameter. For high accuracy H-arithmetic, a higher order may be used, e.g., 5 or 6.
For far-field evaluation, the quadrature order may be reduced for normal bilinear forms, resulting in much reduced runtime.
All implemented bilinear forms have special implementations using SIMD instructions of the CPU. Normally, this results in a faster computation compared to compiler generated code. So, in most cases this flag is only needed for comparison or for debugging.
| Name | Type | Description | Default Value |
|---|---|---|---|
use_matlab_syntax | bool | use Matlab syntax for printing complex numbers, vectors and stdio | off |
color_mode | use color in terminal output if supported | true | |
charset_mode | use ascii or unicode in normal terminal output | depends on terminal | |
permute_save | bool | permute H-matrix before saving as dense matrix | true |
1.9.8